Motor New Replacement Motor 0.9 amps
- Item #: SCE35L09
- Condition: New
- Cannot ship to: Australia, Costa Rica, Denmark, Finland, France, Germany, Ireland, Netherlands, New Zealand, Norway, Sweden, United Kingdom
7000 RPM 110/125 volt AC 50/60 Hz 90 watts . Includes 'L" Bracket
Operates in counter clock wise direction. Fits on most machines that use an external, belt driven motor that have a motor bracket mounting hole below the hand wheel.
Included, but not pictured- mounting bolt, 13 3/4" lug belt, two spare carbon brushes and brush caps.
Please note: The motor bracket has slotted holes for the screws that attach the motor to the bracket. This is for adjustment of the alignment of the motor pulley and hand-wheel belt groove.
Also, if you wish to mount the original terminal block from a vintage Singer (or other) sewing machine to the bracket, you will have to drill a mounting hole on the "L" bracket of this motor, and remove the outlet plug from the end of the motor cord. Specific directions for this are not included. If needed, it is suggested that you enlist the services of a local technician for further assistance with these modifications.
All motors tested for proper operation before being shipped. Please look at the photo- what you see is the motor you will receive.