Spool Pin Metal Tap-in Standard
Replacement spool pin for machines that use a press/drive/ tap in pin. This pin is the same height as the direct replacement pin. Fits many of the Singer (and other) machines that take a standard, tap/push in spool pin.
Can be used at the lower location on the sewing bed of machine when the machine is equiped with a spool pin hole there.
Singer 15-30, 15-88, 15-90, 15-91, 15CL, 27, 66-6, 99-13, 127, 128, 185CL, 201-2* and 1200-1
*note:- later 201's use a screw in spool pin- if the pin has a slot in the top, it is a screw in type.
You will likely have to use a mallet or similar tool to drive the new spool pin into the head. The fit is tight by design.